Accessories/Parts

Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

A permanently mounted bracket that allows 1A Raingutter Towers or Q Towers to be used in some situations where no raingutters exist. Installed with carriage bolts, washers, and lock nuts. - Stainless steel hardware included - If you are attempting to use QTowers and our bolt top loader for your vehicle you will need a pair of Q41 clips, sold separately. - Sold as pairs Product Specs: - Weight: 1.00 lbs. - Dimensions: L 7.10 in x W 2.50 in x H 0.75 in - Limited Lifetime Warranty

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty

- Fits all Yakima crossbars except 86-inch - Sold in sets of 4

- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - Weight: 0.44 lbs. - Dimensions: L 15.50 in x W 1.00 in x H 18 in

There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.

Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.

Yakima's Hood Anchor creates a secure attachment point at your hatch, trunk or hood for bow and stern tie downs. Sold in pairs, they’re highway-speed strong, coated to protect your vehicle’s paint job, and super easy to use - just drop them in place. Product Details - Creates a secure attachment point for bow and stern tie downs - Fits easily under a hood, hatch or trunk - Installation is simple - just drop them in place - Durable coated strap protects your vehicle's paint - Sold as a pair Technical Specs - Weight: 0.43 lbs - Dimensions: L 6.50in x W 2.00in x H 10.12in

Fat bikes fit fine with long wheel straps to carry fat bikes on OnRamp. - Includes 2 FatStraps to carry one fat bike - Fits tires sizes up to 26x 4.5", 27.5" x 4.5" and 29x 3.25"

No awkward loading here. Loading heavy bikes on the StageTwo family of racks is no problem with the RampUp, just lock the ramp in place and roll your bike up onto the tray. - Ramp interlocks to the end of the StageTwo family trays - Provides Loading assistance for heavy bikes - Durable Aluminum construction - Please remove during transportation PRODUCT SPECS - Weight: 3.92 lbs.

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key

SafetyMate ensures you are street-legal when using the StageTwo and StageTwo +2. Keep the clean lines and style of the StageTwo family going with the clean LED Lightbar and internal electrical routing. Safety never looked so good. PRODUCT DETAILS - Keeps your lights and license plate visible while on the road? - Attachment points allow SafetyMate to be visible while StageTwo is in use as well as folded up - Powerful LED taillights have full brake, turn signal, and lighting functionality - Flexible license plate attachment helps protect your plate from steep driveways - Fits all US and Canada plates - Wiring is internally routed through StageTwo and StageTwo +2 for a clean look - Uses 4-Flat electrical connection and includes all necessary wiring to connect to your vehicle's wiring harness - Compatible with StageTwo and StageTwo +2

SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.

Two plus two equals more: More bikes, more adventure, and more fun. Adding on the StageTwo +2 lets you double your capacity to four bikes, each carried securely and in style. The stadium seating architecture increases ground clearance on rutted trails or steep driveways and its offset tray design further minimizes bike to bike interference and maximizes functionality. The forward-facing remote tilt lever means fast access to the trunk area and integrated locking cables combine with your own lock to provide serious security. - Attaches to the 2” StageTwo to carry two additional bikes?Tiered and adjustable bike trays minimize bike to bike interference and maximize ground clearance - StrongArm™ hook secures bike at wheels, protecting painted surfaces and carbon frames - Convenient remote tilt lever for easy rear of car access - Offset Trays for extra bike to bike clearance - Fits most bikes, including fat-tire, mountain, road, hybrid, women’s specific, BMX, kids’ bikes, & E-bikes up to 60 lbs. each - Fits 16” to 29” wheel sizes and tires up to 3.25” wide and up to 5" wide with the StageTwo Fat Bike Kit (Sold Separately) - Accommodates bike wheelbases up to 52” - Integrated SKS (Same Key System) locks included for added bike security - Add your own bike lock to the integrated lock loop for greater bike security - Compatible only with 2" version of StageTwo - Available in two colorways, Anthracite and Vapor

Fat bikes fit fine with long wheel straps to accommodate fat bikes on StageTwo and StageTwo +2. - Includes 2 FatStraps to carry two fat bikes? - Fits tires sizes up to 20x 4.0", 26" x 5.0" and 27.5x 4.5"

The Strap Cap is a crossbar end cap with an expanding nut inside that provides extra protection against tie-down straps sliding off the crossbar. Product Specs: - Weight: 0.25 lbs. - Limited Lifetime Warranty

Compatible with all Yakima Crossbars and Platforms, TrackTower is a robust and simple solution for direct-to-track applications that is loaded with heavy-duty features and a robust off-road weight rating

Yakima's TubeTop solves the dilemma of how to carry bikes that have frames with non-traditional top tubes, such as certain suspension bikes, women's frames, children's bikes and more. The fully adjustable TubeTop is attached to the bike to act as a frame top tube so the bike will mount on all Yakima rear racks. Plus, the TubeTop's large molded collars are gentle on stems and seatposts. This Item may be in stock with Black accents or with Red, but both use the same part numbers. Please contact us to confirm the color of product in stock.

Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.

Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

Getting pressurized water to your destination just got even easier. The EXO RoadShower Kit lets you attach the RoadShower 4G and 7G to your EXO system giving you more mounting options for your RoadShower. Product Details - Connects RoadShower 4G and 7G to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - Tool-free, locking SpeedKnobs attach and lock RoadShower 4G and 7G to EXO SwingBase or EXO TopShelf - Heavy-duty steel construction with durable, powder-coated finish - Includes all mounting hardware (EXO System and RoadShower are sold separately) - Not compatible with RoadShower 10G Product Specs - Weight: 2.46 lbs. - Dimensions: L 14.00 in x W 3.00 in x H 4.00 in

Got a downhill bike - Fully padded cradle accommodates dual-crown suspension forks - For use with HangTight 4 and 6 only - Accommodates 1 bike up to 37.5 lbs. - Fits most modern flat and drop-crown style dual-crown suspension forks

Landing Pad designed to fit a variety of BMW vehicles with fixed 7mm threaded mounting points. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

Modern Lighting Kit for Thule Epos Fully functional and integrated lighting kit with modern styling, specifically designed for Thule Epos for increased visibility in all lighting and weather conditions. Full functionality Features running lights, brake lights, and turn indicators Easy to connect Easy 4-Pin flat connector to connect to vehicle