Accessories/Parts

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

An adapter for Thule TopRide/Thule FastRide to enable transport of bikes with 20x110mm thru-axles. - Enables transportation of bikes with 20x110 mm thru-axle forks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars AUDI - A3 4-dr Sedan with Normal Roof 2014 - 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars MAZDA - CX-3 5-dr SUV with Normal Roof 2016 - 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars HYUNDAI - Accent 5-dr Hatchback with Normal Roof 2018 - 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars FORD - Focus 4-dr Sedan with Normal Roof 2012 - 2018

The Thule Xadapt 9 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid Aero and Thule Professional load bars. Please contact us with any questions regarding compatibility.

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key

An adapter for Thule ProRide to enable transport of fatbikes. - A set of replacement wheel holders for the Thule ProRide bike carrier - Fits wheel dimensions 3 – 5 inches to enable transport of fatbikes

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

Easy-to-install foot for Thule Edge roof racks, for vehicles with flush railings. - Easy-to-install roof rack feet - For vehicles with flush railings - For Thule Edge roof rack systems Features: - Load carrier feet for Thule Edge roof rack system - Foot installs easily onto vehicles with flush railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car - Maximum load: 165 lb. Please also check the maximum roof load capacity of your vehicle.

Fat Tire holder for T2 PRO X

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Yakima's Wide Body Brackets are permanently side-mounted brackets for some fiberglass or camper tops with steep sides. They allow Yakima 1A Raingutter Towers to be used in some situations where no rain gutters exist (towers sold separately).

- Fits all Yakima crossbars except 86-inch - Sold in sets of 4

Fat bikes fit fine with long wheel straps to accommodate fat bikes on StageTwo and StageTwo +2. - Includes 2 FatStraps to carry two fat bikes? - Fits tires sizes up to 20x 4.0", 26" x 5.0" and 27.5x 4.5"

Wind fairing that redirects airflow over roof rack for a quieter ride. - No tools required for assembly or installation. - New system-specific clamps (included) provide the roof rack fairing a clean and secure mounting for our - AeroBlade, AeroBlade Edge, and SquareBar systems. - AeroBlade and AeroBlade Edge clamps give full access to the upper T-track for quick accessory mounting and removal. Technical specifications - Length: 44-inch - Fits Thule AeroBlade - Fits Thule SquareBar

A straight-forward, easy-to-use, locking QR skewer that fits any fork-style bike mount on the market. Compatible with any 9mm x 100mm axles. - Durable stainless steel axle and body - Easy-to-adjust end nut and cam lever - Lockable with SKS lock, sold separately

So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack. Features - Adapts oddly shaped frames for use with hanging style racks - Spring loaded for a solid fit - Coated hooks (prevent wear on your bike) - Installs in seconds - Fits most bikes

SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

Getting your gear onto your rack isn't complete until you've secured it. This pair of super strong box-stitched 16" straps include soft, rubber-coated buckles to protect your boats and gear from scratches.

If you have a trunk or rear rack and a bike with an unconventional frame (such as a full-suspension or ladies bike), you probably need Sunlite's Crossbar Adapter. Vinyl-coated hooks on either end hold your bike and act as a "top tube" for easy transportation. In the middle, a quick-release telescoping adjustment ensures the Crossbar Adapter will fit almost any bike.

Yakima's TubeTop solves the dilemma of how to carry bikes that have frames with non-traditional top tubes, such as certain suspension bikes, women's frames, children's bikes and more. The fully adjustable TubeTop is attached to the bike to act as a frame top tube so the bike will mount on all Yakima rear racks. Plus, the TubeTop's large molded collars are gentle on stems and seatposts. This Item may be in stock with Black accents or with Red, but both use the same part numbers. Please contact us to confirm the color of product in stock.

Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

Make the most of your EXO GearLocker with the EXO GearTotes, collapsible, dividable totes that make it easy to stay organized from house to vehicle to destination and back again. A durable ripstop nylon build, and 50-pound carrying capacity make these perfect for everything from groceries to gear. - Heavy-duty totes carry up to 50 lbs. of gear each - Perfectly sized for the EXO GearLocker - Totes fold flat for easy storage when not in use - Includes a removable divider with hook-and-loop attachment - Structural webbing handles make it easy to haul loaded totes to your vehicle or campsite - Made of 600D fabric with durable PU Coating - Each tote measures 13" x 17.5" x 9" - Sold as a 2-Pack - 1 Year Warranty Product Specs: - Weight: 4.09 lbs. - Dimensions: L 18.00 in x W 13.50 in x H 9.50 in - Limited One Year Warranty